HPE Aruba Networking Central Boot Camp (ANCBC) / Network Management with Central
Course Overview
This HPE Aruba Networking Central training follows that work from the first device to a working wired and wireless network. It starts with the platform. You see how Central sits inside HPE GreenLake, how navigation works, and how groups and sites form the hierarchy. Then you onboard a switch and attach it to a switch configuration profile, so every new switch in that group picks up the same settings. Common system settings, SNMP and source interface, and firmware recommendations follow.
VLANs are built as VLAN profiles and named VLAN profiles. Ports are configured, and LAGs are created where uplinks need more bandwidth or redundancy. You learn loop prevention mechanisms and how the STP anomaly recommender flags a problem before it spreads. VSF and VSX handle high availability, while SVIs, static routes, and VRF add Layer 3 routing.
Wireless follows a similar path. After RF and 802.11 fundamentals, you look at AOS-10 access points and how they differ from Instant APs. You configure WLANs and see AirMatch and ClientMatch at work. User roles and the role-based firewall decide what each client can reach. Gateways, clustering, tunneled SSIDs, mixed forwarding, and microbranch extend the design.
With devices running, attention turns to operations. You monitor sites, clients, and applications, troubleshoot with AI Insights and alerts, and check the audit trail. You also try the REST API with access tokens, manage reports and certificates, and use cloud services such as live upgrades and licensing.
The ANCBC Aruba Central boot camp is built on AOS-10. It gives you a clear sequence for cloud-based network management that you can repeat at every new site, with network monitoring and troubleshooting in place from day one.
Course Objectives
- Onboard AOS-CX switches and assign them to switch configuration profiles
- Apply common system settings, SNMP, and firmware recommendations from Central
- Create VLAN profiles and named VLAN profiles, configure ports, and build LAGs
- Prevent loops and act on STP anomaly recommender findings
- Set up VSF and VSX, then configure SVIs, static routes, and VRF
- Configure WLANs on AOS-10 access points and apply AirMatch and ClientMatch
- Define user roles, policies, and firewall rules for wireless clients
- Deploy gateways, gateway clusters, tunneled SSIDs, mixed forwarding, and microbranch
- Monitor, troubleshoot, report, and upgrade the network through Central and its REST API
Target Audience
- Network engineers: design and run the switching and routing that Central now manages.
- Network administrators: handle daily changes, firmware, and user access in one console.
- Wireless (WLAN) engineers: configure AOS-10 APs, WLANs, and RF behavior.
- HPE Aruba Networking administrators: move existing skills onto the cloud-managed platform.
- Campus and branch network specialists: standardize configuration across many sites.
- NOC staff: rely on monitoring, AI Insights, and alerts to spot issues first.
- IT infrastructure specialists: plan how Central fits with servers, security, and WAN.
- MSP engineers: manage many networks and need consistent, API-friendly operations.
- Certification candidates: want structured preparation for the relevant HPE exam.
- Teams running or planning Central: want the whole team working the same way.
Course Content
23 modules · 101 topics01HPE Aruba Networking Central overview4 topics
- HPE GreenLake architecture
- HPE Aruba Networking product portfolio
- Switch management overview
- Monitoring and troubleshooting features
02HPE Aruba Networking Central architecture2 topics
- Navigation
- Hierarchy
03Monitoring HPE Aruba Networking Central4 topics
- Monitoring sites
- Network monitoring
- Client monitoring
- Application monitoring
04Troubleshooting5 topics
- Methodology
- Tools and resources
- Audit Trail
- AI Insights
- Alerts
05HPE Aruba Networking Central API capabilities4 topics
- API overview
- REST API overview
- Generating and managing access tokens
- Make API calls in the HPE Aruba Networking Developer Hub
06Administration and reporting5 topics
- Identity and access control
- Resource restrictions policy
- User audit logs
- Certificate management
- Manage reports
07Basics of switch management3 topics
- Onboarding a switch
- Switch configuration profiles
- API and GUI
08Switch system configuration4 topics
- Common system configurations
- Source interface and SNMP configuration
- Switch administration and system details
- Switch firmware recommendations
09Configuring VLANs3 topics
- LANs and VLANs
- Creating a VLAN profile
- Named VLAN profile
10Ports and link aggregation3 topics
- LAG concepts and prerequisites
- Switch port configuration
- LAG configuration
11Loop prevention methods3 topics
- Loops in a network switch
- Loop prevention mechanisms
- STP anomaly recommender
12Switch high availability4 topics
- Introduction to VSF
- VSF configuration and management
- VSF monitoring and troubleshooting
- HPE Aruba Networking Virtual Switching eXtension
13Configuring SVIs6 topics
- Routing
- Layer 3 routing
- Layer 3 analysis
- Inter VLAN routing and multilayer switch
- Multilayer interface type
- Configuring SVI in HPE Aruba Networking Central
14Routing fundamentals3 topics
- Introduction to routing
- Static routes
- Virtual Routing and Forwarding
15WLAN fundamentals and RF basics7 topics
- RF bands and channels
- 802.11 standards and amendments
- RF basics
- Antenna technology
- Radio technologies
- RF transmit power
- WLAN mobility
16HPE Aruba Networking security-first, AI-powered networking4 topics
- Network challenges at the edge
- AI-powered analytics
- Built-in security
- Automation and orchestration
17AOS-10 architecture2 topics
- Product line
- Supported hardware
18AOS-10 access points6 topics
- Difference from Instant APs
- What is AirMatch?
- What is ClientMatch?
- Groups
- Configuring WLAN on AOS-10 APs only
- Monitoring
19HPE Aruba Networking user roles8 topics
- HPE Aruba Networking firewall
- Roles, policies, and rules
- Role derivation example
- Identity-based HPE Aruba Networking firewall
- Access control rules
- Application rule
- Aliases
- Global and WLAN policies
20Deployments with gateways10 topics
- When to use gateways
- AOS-10 gateway modes
- AP to gateway connections
- Tunnel orchestration
- Switch to gateway connections
- Gateway to gateway tunnels
- Gateway cluster
- Cluster configuration
- Cluster monitoring
- Deployment with gateways
21Tunnel forwarding mode3 topics
- Tunnel orchestrator
- Configuring tunneled SSIDs
- Mixed forwarding mode
22Microbranch2 topics
- Microbranch configuration
- Policy-based routing
23Cloud services6 topics
- WAN link bandwidth requirement
- Live upgrade service
- AP upgrade
- Gateway upgrade
- Key management
- HPE Aruba Networking Central licensing
Schedule Dates
4 upcoming batches| Batch Dates | Duration | Batch Options | Language | Action |
|---|---|---|---|---|
| 22 February 2027 - 26 February 2027 | 5 Days | 4 hours & 8 hours | English / Arabic | |
| 24 May 2027 - 28 May 2027 | 5 Days | 4 hours & 8 hours | English / Arabic | |
| 30 August 2027 - 03 September 2027 | 5 Days | 4 hours & 8 hours | English / Arabic | |
| 06 December 2027 - 10 December 2027 | 5 Days | 4 hours & 8 hours | English / Arabic |
Can’t find a suitable date? Request a schedule that fits your team.
Request More InformationHPE Aruba Networking Central Training in Oman: Unified Management for Campus and Branch Networks
Port and logistics operators, oil and gas companies, banks, and hotels in Muscat, Sohar, and Duqm often run networks spread across offices, terminals, and remote facilities. HPE Aruba Networking Central training in Oman helps engineers bring those sites under one cloud console. It covers the practical work of onboarding switches, building VLAN profiles, and setting up WLANs. Oman Vision 2040 places strong emphasis on economic diversification and digital transformation, and modern, well-managed networks support both. For teams in Muscat, this Aruba Central boot camp covers the full deployment path, from AOS-CX switching and AOS-10 access points to gateways and microbranch. Engineers new to the platform may first want introductory HPE Aruba Networking training. Those focusing on Wi-Fi can follow up with wireless and mobility courses. Explore our wider HPE Aruba Networking course catalog as well. Look through the outline and contact us if you’d like to discuss options for your team.
FAQs
What is ANCBC, and is it the same as Network Management with Central?
ANCBC is the HPE Aruba Networking Central Boot Camp, a five-day course on configuring and running networks through Central. It isn’t the same as Network Management with HPE Aruba Networking Central. The boot camp includes content from that course, plus HPE’s courses on managing wired networks with Central and introducing AOS-10, so its scope is wider.
What can you do with HPE Aruba Networking Central, and what will the course teach?
Central lets you onboard, configure, monitor, and troubleshoot switches, APs, and gateways from one cloud console. The course teaches switch onboarding and profiles, VLANs, LAGs, loop prevention, VSF, VSX, and routing. It also teaches AOS-10 WLANs, user roles, gateways, tunnel forwarding, and microbranch. Monitoring, AI Insights, the REST API, live upgrades, and licensing are covered too.
Which engineers get the most from this boot camp?
Engineers who deploy or expand networks with Central get the most from it. Network engineers and administrators learn efficient onboarding and configuration. Wireless engineers focus on AOS-10 WLANs and RF features. Branch specialists, MSP engineers, and NOC staff gain a consistent method they can repeat across many sites.
Do I need networking experience before starting?
Yes, basic networking knowledge is expected. The recommended background is an understanding of switching, VLANs, IP addressing, and routing fundamentals. Familiarity with enterprise wired and wireless LANs is also recommended. General knowledge of network management tools and web-based interfaces helps, and some monitoring or administration experience is beneficial.
What will I be able to configure after the course?
You will be able to configure most of a branch or campus network through Central. That covers switch profiles, VLAN profiles, ports, LAGs, VSF and VSX, SVIs, static routes, and VRF. You will also be able to set up AOS-10 WLANs, user roles, firewall policies, gateway clusters, tunneled SSIDs, and microbranch, and then monitor the results.
Is the HPE exam part of this course?
No, the exam is separate from the training. The boot camp is designed to help prepare you for the HPE Advanced Product Certified – HPE Aruba Networking Central exam, which is listed as HPE6-A90. You earn the certification only by registering for and passing that exam. Confirm current exam details on HPE’s certification site.
Why use configuration profiles instead of configuring each device?
Profiles keep every device in a group consistent and make changes faster. Instead of repeating the same CLI commands on twenty switches, you change one profile and Central applies it. That reduces typing errors and prevents configuration drift between sites. New devices also pick up the correct settings as soon as they are onboarded.
Can this course support my career as a network engineer in Oman?
It can do this by adding cloud-managed networking skills to your switching and wireless experience. Organizations in logistics, energy, banking, and hospitality run distributed networks that benefit from central management. The course gives you structured practice with Central. Career results depend on many factors, so we don’t guarantee any particular outcome.
Flexible Training Options to Meet Your Needs
Choose how you learn — live online, in-classroom, at your workplace, or internationally. CounselTrain delivers certified IT training in the format that fits your team.
Select the method that best suits your needs.
Online Instructor-Led Training
Learn from the comfort of your workplace or at home through live virtual sessions led by expert trainers.
Learn moreHighlights
Classroom Training
Participate in interactive, face-to-face training in our top 5-star training facilities in Dubai.
Learn moreHighlights
Onsite Training
Learn a customised curriculum in your workplace to ensure the most impact and team participation.
Learn moreHighlights
Overseas Training
Participate in our international training sessions and improve your abilities with world-class instructors.
Learn moreHighlights
Related Courses
Other courses in the same category that might interest you.
